Skip to content

Troubleshooting

My Windows Installation is failing

While FTS will work with this OS, we do not support it

My Ubuntu 22.04 Installation is failing

FTS 2.0 supports 22.04 older versions require Ubuntu 20.04

My FTS Installation is failing

FTS 2.0 has been tested with Python 3.11, should work with others version (3.10). Older versions require 3.8

My Raspberry Pi installation has an issue with the WebMap

This has been addressed, so you should not have the issue. The older webmap was a Nodered packaged component, compiled for AMD64, so it will not run in the Pi. You need to: * install Node Red * import the flow from source * configure the flow

Initial setup doesn't ask to create a YAML file, how to make one manually?

copy this code, adapting to your environment

System:
  FTS_DATABASE_TYPE: SQLite
  FTS_CONNECTION_MESSAGE: Connected
  FTS_OPTIMIZE_API: True
  FTS_MAINLOOP_DELAY: 1
Addresses:
  FTS_COT_PORT: 8087
  FTS_SSLCOT_PORT: 8089
  FTS_DP_ADDRESS: [YOUREXTERNALIP]
  FTS_USER_ADDRESS: [YOUREXTERNALIP]
  FTS_API_PORT: 19023
  FTS_FED_PORT: 9000
  FTS_API_ADDRESS: [YOUREXTERNALIP]
FileSystem:
  FTS_CONFIG_PATH: /opt/FTSConfig.yaml
  FTS_DB_PATH: /opt/FreeTAKServer.db
  FTS_COT_TO_DB: True
  FTS_MAINPATH: /usr/local/lib/python3.11/dist-packages/FreeTAKServer
  FTS_CERTS_PATH: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs
  FTS_EXCHECK_PATH: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/ExCheck
  FTS_EXCHECK_TEMPLATE_PATH: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/ExCheck/template
  FTS_EXCHECK_CHECKLIST_PATH: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/ExCheck/checklist
  FTS_DATAPACKAGE_PATH: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/FreeTAKServerDataPackageFolder
  FTS_LOGFILE_PATH: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/Logs
Certs:
  FTS_SERVER_KEYDIR: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs/server.key
  FTS_SERVER_PEMDIR: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs/server.pem
  FTS_TESTCLIENT_PEMDIR: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs/Client.pem
  FTS_TESTCLIENT_KEYDIR: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs/Client.key
  FTS_UNENCRYPTED_KEYDIR: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs/server.key.unencrypted
  FTS_SERVER_P12DIR: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs/server.p12
  FTS_CADIR: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs/ca.pem
  FTS_CAKEYDIR: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs/ca.key
  FTS_FEDERATION_CERTDIR: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs/server.pem
  FTS_FEDERATION_KEYDIR: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs/server.key
  FTS_CRLDIR: /usr/local/lib/python3.11/dist-packages/FreeTAKServer/certs/FTS_CRL.json
  FTS_FEDERATION_KEYPASS: [YOURPASS]
  FTS_CLIENT_CERT_PASSWORD: [YOURPASS]
  FTS_WEBSOCKET_KEY: [YOURPASS]

after XXX months of use the disk is full

  • FTS writes the output of the service to a log located here: 
    /var/log/fts/fts-stdout.log
  • depending on inbound traffic, this can become very large and subsequently, need to be manually deleted

My XXX component is not connecting / showing

for fts check out 

/opt/FTSConfig.yaml

for the UI check out 

/usr/local/lib/python3.11/dist-packages/FreeTAKServer-UI/config.py

for the webmap check out 

/opt/webMAP_config.json
for the video server check out 
/opt/mediamtx.yml

SSL connection is working but in an inconsistent way

ISSUE: SSL certs are not working Cause: the certs are duplicated on your machine

This has been observed on ATAK 4.7 + and WinTAK for functions that requires both encrypted TCP and SSL connections. The ExCheck plugin is an example of that. The main symptom on the client is that the connection to the server fails (for specific functions). This is NOT a FTS issue, it's provoked by the way ATAK stores certificates.

Workaround ATAK

  • clear the content using the ATAK function
    image
  • create a new user with mobile certs
  • connect to FTS using TCP
  • download new the certs
  • de-activate tcp and activate the new certs

Workaround WinTAK

  • physically delete all the certs with the name (IP) of your sever from the machine in WinTAK the certs are located in C:\Users\[USERNAME]\AppData\Roaming\WinTAK\SslCerts
  • Proceed as above but use WinTAK certs

Using SSL I get frequent disconnects

This is a problem of the client not sending data.

WinTAK : under settings/network preferences set the TCP Connection timeout higher, (e.g. 60 seconds)

ATAK : under settings/network preferences/ network connection preferences / TCP connection timeout (e.g. 40 seconds)

package not found

if, trying to start FTS you get an error 'package not found' 

'package not found'
navigate to the physical location where the controllers are installed and start the server from there.

You may also check for missing libraries and install then using pip

issue connecting in WinTAK

if you have issues connecting WinTAK to FTS, try to deactivate the TAKChat plugin, under the plugin section

Issues connecting using SSL

If you have issue connecting to FTS using SSL, even if you have downloaded new certs, you need to manually delete the old files from your device. In WinTAK (tested with 4.9) you can find certs files under 

C:\Users\[USERNAME]\AppData\Roaming\WinTAK\SslCerts
you should have 3 certifications files of the form:

  • [IP]_FreeTAKServer-Hash
  • 198-199-70-185_FreeTAKServer-2-a3_wbu7kirkizulslz1pstvv0xoo5qbcrr4.p12.dat2

and another 3 of the form:

  • [UserNAME]Hash
  • FreeTAKTeamSupporte4fddab2-6102-4ab6-a9ec-0fee8edf8b10.p12

client2client datapackages

If you have issues sending datapackages directly to clients via FTS, make sure the -IP argument you specified can be reached from your device. A quick way to test if it works is to take a picture with Quick Pic in ATAK and send it to another client. Please also note that for that test ATAK clients needs to be on different network (ie one on mobile and one on wifi), because if you run them in same network (WiFi, VPN, etc.) they will just use same multicast group, bypassing FTS completely.
When you post package to specific contact in ATAK, following happens:

1) Datapackage is uploaded to server, recorded in database and stored in FTS directory
2) Client receives payload with URL pointing to datapackage so ATAK can download it

Assuming you want to run open-to-everyone FTS instance, and you have server hosted somewhere, you need to specify public IP address in -IP argument. And just in case, -IP also accepts domain names. If you run it at home and port forward on router doesn't work, check if you receive actual IP address and not being NATed and ports 8080 and 8087 are not filtered - you can ask your ISP about that.